Product Introduction:

The AT-TBL-180 continuous experimental coating machine is a laboratory type continuous coating machine. Equipment that can be used for surface coating processes on various substrates. The equipment achieves the coating process requirements of the coil through methods such as scrapers, measuring rods, and slit coating knives, with high coating accuracy, good stability during hot air drying, and good compatibility with production process parameters. Widely used in the coating of paper, film, high-end tape, and various functional film industries.

Technical parameters:

1. Coating type: scraper/measuring rod/slit scraper continuous coating (coating method can be selected according to personal needs)

2. Width of guide roller: 200mm

3. Coating width: Effective maximum width 180mm (other widths can be customized)

4. Coating speed: up to 400mm/min (the coating speed determines the length of the drying channel, which can be customized according to the customer's coating and drying speed)

5. Coating display accuracy: Scraper adjustment accuracy 1 μ Measurement rod accuracy of 5%

6. Coating thickness: determined based on the slurry and coating method,

7. Drying unit: Standard hot air drying (customizable for infrared drying and UV curing), single section 500mm long

8. Drying temperature: Room temperature -150 ± 5 ℃, adjustable

9. Tension control: 1-40N

10. Roll diameter: up to 200mm

11. Winding accuracy: ± 0.5mm

12. Heating temperature range of the material tank: room temperature -200 degrees (temperature can be set) (the slurry does not require heating and the heating function can be omitted)

13. Power supply: Voltage single-phase 220VAC ± 10%, frequency 50Hz/60Hz,

14. Power: 4.5KW (power when normal material tank heating and hot air drying are turned on simultaneously)

15. Composite function: Yes

16. Installation dimensions: 1500mm long x 650mm wide x 650mm high

17. Weight: Approximately 380Kg

Product features:

1. Adjustable scraper coating method, equipped with precision adjustment mechanism and display dial indicator, achieving high coating accuracy;

2. Design a heatable material tank to hold slurry, requiring less paint for a single experiment and a wider range of adhesive applications;

3. The substrate is supplied in rolls, with simple film penetration and freely adjustable tension;

4. Hot air drying oven, with good temperature uniformity and high-quality drying effect;

5. PLC control, convenient and easy to use;

6. It has composite functions, which are composite units and can be equipped with multiple composite functions according to customer needs

After sales service:

Thank you for your inquiry. Shandong Annimat Instrument Co., Ltd. was established in 2007 and has been committed to the research, development, production, and sales of quality testing instruments for nearly a decade. In the production and operation process, product quality is regarded as the life of the enterprise, and every product developed by the company is constantly improved, striving for perfection. Throughout the history of human technological development, we firmly believe that the birth of any product depends on the development of technology, and the development of any technology originates from the exploration of materials. The exploration of any material depends on the progress of technology, and the progress of any technology is supported by experimental means. Humans never lack ideas, and we need the means to realize them. Annimat Instruments will continue to provide means for your ideas and creativity. If you have any questions, please feel free to contact our customer service personnel. We will do our best to provide you with pre-sales, in sales, and after-sales services.