Product Introduction:

The core of PFI grinding is the knife roller and chassis, a built-in knife roller (with 33 blades), and a smooth beating chamber. The knife roller and chassis rotate in the same direction, but at different linear speeds. In order to ensure the beating under standard conditions, the beating pressure is fixed at 3.33 N/mm.

Technical parameters:

Slurry weight: 24-30g, concentration 10% (maximum 300 ml mixed slurry)

Digital display: beating speed, beating time, power output W (continuous measurement), energy consumption during beating process KW/h

Knife roller speed: 1458 ± 30rpm

Chassis speed (slurry chamber): 700rpm

Pulping pressure: 3.33N/mm

Beating time: 2-10 minutes

Power supply: 400V/50Hz

Compressed air: 400-600kPa.

Product features:

→ Good beating repeatability

The beating chamber and knife roller are made of stainless steel and driven by synchronous belts

→ Automatically stop beating according to the set parameters, and the knife roller automatically returns to the center position

Adjustable grinding clearance

Easy to operate, the beating room is easy to empty and clean

Always maintain the same beating pressure, unaffected by air pressure.